Flex-Jumper Technical Information

Flex Jumper are highly flexible flat conductor connectors combining the properties of flat cables and connector pins.

They can be used both as soldered connection cables and quick-connect connectors.

Flex Jumper are resistant to vibration and bending, thus acting as vibration dampers. This is achieved in particular by flattening the round conductor.

The Insulation materials used ensure a maximum of reliability even at high temperatures.

 


HIGH VIBRATION AND BENDING RESISTANCE

The smooth and notchless transition from the flat to the round connector pin ensures
a break-proof connection point.
The natural vibration of the components to be connected occurring in numerous applications are transmitted via a connection point to the jumper and compensated by the same due to its
specific properties. Thus the jumper counteracts a possible vibration build-up in the components to be connected, preventing their destruction due the vibration.


PRODUCT DESCRIPTION

Immediately ready for installation, you connect the conductor sheets without any long operation, no cut, no remove the insulation, put in, or solder in – and ready.

High vibration safety, break safe, relieble connection
guaranteed even if milionfold used.

Savings of labour time and costs for assembling by extremely easy handling.

High labour productivity, e.g. because of simultanous soldering of all connection points in the solder bath.

Standard pin length 3,2 +/- 0,7


Pitch

Nº Conductors

Insulation Leght

Insulation

Termination

0,8

2-50

15-999

Nomex®/Polyester/Kapton®/Teflon®

A/B*

1

2-50

15-999

Nomex®/Polyester/Kapton®/Teflon®

A/B*

1,25

2-50

15-999

Nomex®/Polyester/Kapton®/Teflon®

A/B*

1,27

2-50

15-999

Nomex®/Polyester/Kapton®/Teflon®

A/B*

2

2-50

15-999

Nomex®/Polyester/Kapton®/Teflon®

A/B*

2,54

2-50

15-999

Nomex®/Polyester/Kapton®/Teflon®

A/B*

3,18

2-50

15-999

Nomex®/Polyester/Kapton®/Teflon®

A/B*

3,5

2-50

15-999

Nomex®/Polyester/Kapton®/Teflon®

A/B*

3,81

2-50

15-999

Nomex®/Polyester/Kapton®/Teflon®

A/B*

5,08

2-50

15-999

Nomex®/Polyester/Kapton®/Teflon®

A/B*

A=Straight
B=Right angle
Special customer design.


Nomex®

Low cost paper based material. Ideal for general purpose applications in normal environments where a change in resistance due to humidity is not critical.


Poliester

Improved electrical and mechanical properties when compared to Nomex for more demanding general purpose applications.


Teflon®

Superior electrical and mechanical properties. Particularly suitable for applications where there is moisture or changing climatic conditions.


Kapton®

Unsurpassed mechanical properties especially at very high temperatures. Widely used for military and aerospace applications and critical areas of vehicles.

®Nomex, Teflon and Kapton are trademarks of E. I. DuPont de Nemours.

 

Standard pitches:
1.27mm (.050")
2.54mm (.100")

Also available:
1.00mm (.039")
1.25mm (.049")
1.90mm (.075")
2.00mm (.079")
3.18mm (.125")
3.81mm (.150")
5.08mm (.200")

www.meescuder.com © 2010 info@meescuder.com •C/Potosí 2,6º 08030 Barcelona •